6-Digit Office Code Table - Vodavi Starplus Triad-S System Programming Manual

LCR Operation

6-Digit Office Code Table

Technical Manuals Online! - http://www.tech-man.com
Programming Steps
1. Press the 6-DIGIT TABLE flexible button (FLASH 75, Button #2). The
following message displays:
6 D IG IT ROU T ING TA B LE
EN TE R A AA
= [0] to remove codes, [1] to add codes
AAA = Area Code
RR = Route Number 00-15
NNN = Office Code
2. Press the HOLD button to save the entry. A confirmation tone is heard
and the display updates.
3. Enter additional office codes to be programmed into the same Area
Code/Route Table, pressing HOLD after each office code entry.
4. Press a flexible button to program a different table.
Deleting All Entries in an Area Code/Route Table
Enter [0 AAA RR ###].
Description
The 6-Digit Office Code Table determines a route for one or a group of
individual office codes within an area code. Certain office codes within an
area code can be given unique or special routing. If the office code dialed
is not found in the 6-digit Office Code Table, the call is then routed
according to the route list table as was entered in the 3-digit table.
The system allows twenty 6-digit Area/Office code tables that may be
used to route specific office codes within an area code. Each table routes
calls for a common area code to a specified route. All entries made to a
table route those office codes to the specified route list table. An area
code may be entered into more than one 6-digit table with different
routes specified.
R R N NN HO LD
10-9