Ucd Message Interval Timer - Vodavi Starplus Triad-S System Programming Manual

7-8

UCD Message Interval Timer

Technical Manuals Online! - http://www.tech-man.com
Description
The UCD Ring Timer determines how long a call rings into a busy UCD
group before being presented to the first recorded announcement. By
default, the UCD Ring Timer is set for 60 seconds, and is variable from
000–300 seconds.
A RAN Table must be specified in UCD programming. If a RAN Table is
NOT specified, incoming CO callers are not answered but continue to
receive ringback.
Programming Steps
1. Press the MIT TIMER flexible button (FLASH 61, Button #2). The
following message displays:
MES SAG E IN TER VA L
06 0
2. Enter a valid number on the dial pad which corresponds to
000-600 seconds.
3. Press HOLD to save the entry. A confirmation tone is heard and the
display updates.
The UCD Ring and Message Interval Timers only apply when RAN
ports are specified. If RAN ports are not specified, incoming callers
continue to receive a ringback tone.
Description
The UCD Message Interval Timer (MIT) determines the length of time a
caller remains in queue (listening to MOH, if provided) between recorded
announcements. By default, the UCD Message Interval Timer is set for
60 seconds and is variable from 000 to 600 seconds.
0 00- 60 0
UCD Timers