Pbx/Centrex Codes On A Flex Button; Release Button; Redial; Last Number Redial - Vodavi Starplus STSe User Manual

PBX/Centrex Codes on a Flex Button

PBX/Centrex Codes on a Flex Button
For one-button access to Centrex or PBX features:
1. Program Centrex or PBX code into a Station or System Speed
Dial bin, including hook-flash (FLASH key), [ ], and [#]
commands (refer to
2. Program that speed bin onto a flexible button (refer to
"Flexible Button Programming" on page

Release Button

The Release Button feature allows the station user to speed up call
handling time by disconnecting calls while being off-hook.
Using the handset, while off-hook (not the speakerphone):
Press the preprogrammed RELEASE button [641] to terminate
an intercom call, transfer sequence, page announcement, or
CO call.

Redial

Last Number Redial

To use Last Number Redial, either:
1. Press SPEED.
2. Press the pound [#] key. The last number dialed over an
outside line will be automatically redialed.
-or-
Use the Soft Key's LNR option when in an idle condition.
-or-
Press the preprogrammed flex button (650).
STSe Station User Guide
"Speed Dial" on page 82).
50).
August 2008
75