communicating with each other, thus providing an extra layer of security. The key can
be any text string you choose, as long as it is the same for all BSCs in the Secure
Mobility configuration.
4.
Re-enter the Secure Mobility mesh key in the Confirm field.
Set the BSC role to Secure Mobility Node List Master by marking the Act as a master
5.
and transmit mobility node list to the mobility nodes radio button.
Click Save to save the BSC Secure Mobility settings to the BSC database.
6.
Do not restart the BSC until instructed to do so at the end of this procedure.
Step 2: Create a List of Nodes
You now need to create a list of Nodes on the Secure Mobility Node List Master BSC.
1.
Select Secure Mobility Node from the Create drop-down list.
The Create a Secure Mobility node page appears as shown in Figure 14-8.
2.
Complete the following steps for each Secure Mobility Node BSC:
BlueSecure™ Controller Setup and Administration Guide
Figure 14-7: BSC Secure Mobility Setup Page
Figure 14-8: Edit the Secure Mobility Node Page
Secure Mobility®
14-7