Creating A Network Space Destination; Creating Destination Groups; Figure 8-12: Create A (Destination) Network Page - ADTRAN BlueSecure Controller Setup And Administration Manual

Chapter 8: Roles and Role Elements
You might be prompted to restart the BSC. We recommend that you do not restart the
BSC until you have completely finished configuring the BSC for use in your network.

Creating a Network Space Destination

To set up a destination for all devices in a given network address space:
Click the User Roles tab in the BSC administrator console, and then click the
1.
Destinations tab.
2. Select Destination Network from the Create drop-down list on the Destinations page.
The Create a network page appears as shown in Figure 8-12.
Enter a meaningful name for the destination device network in the Name field.
3.
Enter the device network's IP address in dotted-decimal format in the Address field.
4.
Enter a bit mask in the Netmask field specifying which bits in the IP address
5.
correspond to the network address and which bits correspond to the subnet portion of
the address.
Mark the Invert this destination checkbox to define all devices but those on this
6.
network.
Optional. Enter additional descriptive information about the network on which the
7.
devices reside in the Notes field.
Click Save to store the information or Save and create another to continue defining
8.
network destinations.
You might be prompted to restart the BSC. We recommend that you do not restart the
BSC until you have completely finished configuring the BSC for use in your network.

Creating Destination Groups

Create groups of devices to enable you to easily provide or deny access to multiple
network devices based on a user's assigned role. Typically, the destinations in a group
are physically or logically related in some way.
To set up a destination group:
1. Click the User Roles tab in the BSC administrator console, and then click the
Destinations tab.
8-12

Figure 8-12: Create a (Destination) Network Page