Table of Contents
Advertisement
•
Appendix C,
scanning on the BCS using the fully integrated Check Point Integrity Clientless
Security product.
•
Appendix D,
serial port to access essential functions if you misplace a password or experience an
ISP service outage.
•
Appendix E,
additional product information or support.
Notational Conventions
This guide uses the following notational conventions to convey information:
Note: Notes call attention to important information.
Caution: Cautionary statements call attention to a condition that could result in the loss of
data, damage to equipment, or physical injury.
Italic
Monospace text represents information displayed on the local BlueSecure Controller
command console or on other computer displays.
Bold monospace text represents information that you enter at the BlueSecure Controller
command console or at other computer terminals.
Related Documentation
Please refer to these other related documents for information about your BlueSecure
Controller:
BlueSecure Controller Quick Start Guide
•
BSC distribution for a concise overview of how to get up and running quickly with
your BSC.
BlueView™ Management System User Guide
•
to manage the BlueSecure Controllers installed on your network from a remote central
location using the Bluesocket BlueView Management System.
BlueSecure Access Point 1500 Installation Guide
•
with your BSAP distribution for a concise overview of how to get up and running
quickly with the Bluesocket BlueSecure 1500 Access Point.
BlueSecure Access Point 1540 Installation Guide
•
with your BSAP distribution for a concise overview of how to get up and running
quickly with the Bluesocket BlueSecure 1540 Access Point.
BlueSecure Intrusion Protection System Centralized Sensor Installation Guide
•
to this document included with your BIPS Centralized Sensor distribution for
instructions on physically installing the sensor, connecting it to your network, and
configuring it with an IP address.
Terminology
For brevity, we use the term BSC to refer to the BlueSecure Controller product family as a
whole, unless reference to a specific model is required.
We use the term BSAP to refer to the BlueSecure Access Point product family as a whole,
unless reference to a specific model is required.
BlueSecure™ Controller Setup and Administration Guide
"Endpoint Scanning,"
"Serial Port Access to Essential Functions,"
"Contacting Bluesocket, Inc.,"
text indicates emphasis or highlights the titles of books used in cross-references.
provides procedures for configuring endpoint
describes how to use the
describes how to contact Bluesocket for
- Refer to this document included with your
- Refer to this document for procedures
- Refer to this document included
- Refer to this document included
- Refer
xvii
Advertisement
Table of Contents
