Error Checking On Page Forms; Using Command Buttons And Icons; Table 3-1: Administrator Console Command Buttons And Icons - ADTRAN BlueSecure Controller Setup And Administration Manual

Error Checking on Page Forms

Required form elements are marked with a blue bounding box. Once a user enters a
value and moves to the next form element on the page, the system validates the previous
form element. If the element does not meet predefined validation criteria, the validation
fails and the input field is demarcated by a red bounding box. Fields that have passed
validation are demarcated by a green bounding box. After the user submits the form, for
example by clicking the Save button, the system performs the same validation on each
form element and reports any errors.
In many of the BSC administrator console pages, you are prompted to enter individual IP
addresses, address ranges, address/netmask pairs, or fully qualified domain names in
various fields. When the address is for an external machine, the system will attempt to
verify the address by pinging the machine. If the ping is unsuccessful, the system displays
the message "The address could not be reached".

Using Command Buttons and Icons

Command buttons are located along the top and bottom of BSC administrator console
pages that have data entry fields. The command icons are located in the Action column of
each table row on a page. Each table row represents a single database record. Mark the
corresponding checkbox to select a table row for use with a command button. The
following table describes the most commonly used BSC administrator console command
buttons and icons.
Command Button
BlueSecure™ Controller Setup and Administration Guide

Table 3-1: Administrator Console Command Buttons and Icons

or Icon
Store the information on the page to the BSC database.
Store the information on the page to the BSC database and then enable creation of
another record of the same type.
Display the previously visited page (without saving the data entered on the current page).
Display the next subpage on the current page.
Reset all data entry fields on the page to their previous setting.
Remove the currently displayed record from the BSC database. Also, delete the selected
database record(s) from the displayed table.
Enable the selected database record(s).
Disable the selected database record(s).
Quarantine the selected device.
Unquarantine the selected device.
Delete the BSC database record displayed in the corresponding table row.
Error Checking on Page Forms
Click to ...
3-11