Bsc-2100 Displays, Controls, And Connectors; Figure 2-2: Bsc-2100 Displays, Controls, And Connectors - ADTRAN BlueSecure Controller Setup And Administration Manual

Admin Port Use the Admin port to manage your controller without needing to be connected to the
managed or protected ports. The admin port allows for HTTPS access and SSH access.
This port doesn't support mobility, routing, VLANs or firewalling.
Managed Ports Use the Managed Port to connect the BSC to the managed side (i.e., the wireless side) of
your network via Ethernet. The BSC-2200/3200/5200 Managed Port is equipped with
a copper, RJ-45 10/100/1000 Mbps Ethernet connector (standard) or a 1000BaseSX
SC-style connector (optional).
Protected Ports Use the Protected Port to connect the BSC to the protected side (i.e., the wired side) of
your network via Ethernet. The BSC-2200/3200/5200 Managed Port is equipped with
a copper, RJ-45 10/100/1000 Mbps Ethernet connector (standard) or a 1000BaseSX
SC-style connector (optional).

BSC-2100 Displays, Controls, and Connectors

The following figure shows the Bluesocket BSC-2100 front and rear panel displays,
controls, and connectors.
Status LEDs The Bluesocket BSC-2100 provides the following front-panel status LEDs:
• PWR - Lights when the BSC is connected to an AC power source and its rear-panel
power switch is in the closed position (|).
• DISK - Flickers when the BSC is writing data to or reading data from non-volatile
memory.
On the BSC-2100 rear-panel, ACT/LINK LEDs and Speed LEDs are provided for the
copper Managed and Protected Ports. The ACT/LINK LED is off when there is no link,
lights green when a link condition exists, and blinks during an activity phase
The Speed LED is off for a 10 Mbps Ethernet connection, lights green to indicate a Fast
Ethernet connection (100 Mbps), and lights yellow to indicate a Gigabit Ethernet
connection (1000 Mbps). Separate Activity and Link LEDs are provided for fibre
Managed and Protected Ports.
BlueSecure™ Controller Setup and Administration Guide
Status LEDs Liquid Crystal Display
Serial Port

Figure 2-2: BSC-2100 Displays, Controls, and Connectors

BSC-2100 Displays, Controls, and Connectors
Power and Reset Controls
Network Connectivity Ports
Activity/
Link
LEDs
Speed
LEDs
2-5