Table of Contents
Advertisement
To configure transparent certificate authentication:
Displaying the
Click the User authentication tab in the BSC administrator console.
1.
New
Select Transparent Certificate Authentication from the Create drop-down list on the
2.
Transparent
User authentication page.
Certificate
The New Transparent Certificate server page appears as shown in Figure 6-13.
server page
Enable server
The Enable checkbox is marked by default to make the server available for user
authentication.
Name
Enter a meaningful name for the transparent certificate authentication server.
Precedence
Optional. If you are setting up multiple external authentication servers and need to
establish the order in which the BSC checks the servers for user authentication, select the
server's priority from the drop-down list.
Accounting
To enable RADIUS accounting for this server, select the name of the external RADIUS
accounting server from the Accounting server drop-down list.
See "RADIUS Accounting" on page 7-1 to configure a new RADIUS accounting server for
selection in the drop-down list.
Alternatively, you can select the Create... option to open a window that enables you to
configure a new RADIUS accounting server. After you save the server information, you
are returned to the New Transparent Certificate server page where you can select the
RADIUS accounting server from the drop-down list.
BlueSecure™ Controller Setup and Administration Guide
Figure 6-13: Enabling Transparent Certificate Authentication
Transparent Certificate Authentication
6-33
Advertisement
Table of Contents
