ADTRAN BlueSecure Controller Setup And Administration Manual page 211

Displaying the Click the Web Logins tab in the administrator console, select the pencil icon to Edit
1.
Hotspot Account the Default Wireless Network Log In, and then click the Hotspot Account Generation
Generation tab.
Page
The Edit Hotspot Account Generation for custom login page appears as shown in
Figure 11-8.
Enable users to Mark the checkbox.
create their own
local accounts?
Plans Select a plan from one or more of the drop downs. Your selections determine the
1.
wireless access rate plan(s) that are presented to end users on the account selections
web page.
Complete the following for each selected wireless access rate plan:
a)
b)
c)
d)
e)
To present an unlimited option to the user, mark the Unlimited checkbox, select the
2.
ending year from the drop down in the Max column, and then select the month and
day from the adjacent drop downs.
Billing Service Mark the radio button of your online billing/payment transaction account provider:
3.
Authorize.net (SIM), Authorize.net AIM, or CyberSource.
Authorize.net Enter the credentials the BSC requires to access your credit card processing provider
(SIM): account: Account Login ID, Transaction Key, and Receipt Key.
Transaction URL - Enter the URL to which users will be redirected when setting up their
account, for example:
https://secure.authorize.net/gateway/transact2.dll
Response URL - If your BSC's protected IP address cannot be reached via the Internet or its
hostname is not publicly accessible, enter a URL that Authorize.net can use to notify this
BlueSecure Controller of the transaction result. For example:
https://152.210.198.81/login.pl
In addition, port forwarding should be enabled on your firewall. Forward port 443 from
your outside IP address (the Response URL) to the BSC's Protected IP address. Only allow
connections from Authorize.net.
Note: If the Response URL is not externally reachable, you can override this requirement
by marking the Enable receipt page on transaction server checkbox.
Enable receipt page on transaction server - Mark this checkbox if you want a receipt
page to be displayed to the end user instead of immediately returning them to the login
screen. If marked, the Response URL does not need to be externally reachable. The same
BlueSecure™ Controller Setup and Administration Guide
Enter the Name of the plan.
This text is displayed on the selections page.
Enter the Multiplier. A Multiplier is a way to allow an end user to specify plans
that expire after a multiple of some number of hours/days/weeks. Plans expire at
(Plan * Multiplier) units from the date of creation. For example, if a user sets Plan
to Daily and Multiplier to 5, the account expires in 5 days.
Enter the Rate charged for the plan.
This text is displayed on the selections page. A rate of 0 indicates a free account.
Enter the Max number of units (hours, days, etc.) for which a user may purchase
the plan.
Select the Role into which the plan user is authenticated
Customizing the User Login Page
11-15