Table of Contents
Advertisement
Configuring the BSC Managed Interface
Address range
Optional. If you have IP addresses that are reserved for particular devices and do
to exclude
want these addresses available for DHCP assignment, then enter the range of
addresses to exclude from first to last, such as 192.168.162.22 to
192.168.162.27.
If you have individual IP addresses to exclude, then enter in the From fields only.
Netbios name
Optional. If Microsoft Windows name resolution is needed, this setting specifies the
server
IP address of the Windows Internet Naming Service (WINS) server.
DNS domain
Enter the domain name to append to a hostname when its domain is not specified.
name
For example, if the hostname myhost is received, and the default domain is
widgetsrus.com, then the fully qualified domain name becomes
myhost.widgetsrus.com.
Primary DNS
IP address or fully qualified domain name of the primary DNS server. Leave this field
blank to use the system default(s) from the protected interface.
Secondary DNS
Optional. IP address or fully qualified domain name of the secondary DNS server.
Default lease
Maximum time in seconds that an IP address is granted to a client.
Maximum lease
Elapsed time in seconds before the client can request another lease of an IP address
assigned by the DHCP server.
Figure 4-8: DHCP Settings for Managed Interface (eth1) Page
4-13
BlueSecure™ Controller Setup and Administration Guide
Advertisement
Table of Contents
