Table of Contents
Advertisement
•
Do not allow liquid to enter the Bluesocket BSC chassis, and do not operate the
system in a wet environment. If the Bluesocket BSC gets wet, contact Bluesocket.
•
Do not push any objects into the BSC chassis vents or openings. Doing so can result
in fire or electrical shock.
•
Connect the Bluesocket BSC to the correct external power source as indicated on the
electrical ratings label. Consult Bluesocket, Inc. if you are not sure of the power
required to operate the equipment in your locale.
•
Use only approved power cable(s). If you have not been provided with power cables
for your Bluesocket BSC, purchase ones that are approved for use in your country.
•
To help protect the Bluesocket BSC components from sudden transient increases or
decreases in electrical power, use a surge suppressor, line conditioner, or un-
interruptible power supply (UPS).
•
Position Bluesocket BSC cables and power cords carefully so that nothing rests on
them; route cables and power cords so they cannot be stepped on or tripped over.
Precautions for
Observe the following precautions when installing the BSC in an equipment rack:
Rack-mounted
•
Always load the rack from the bottom up, and load the heaviest item in the rack first.
Equipment
•
Ensure the equipment rack is fixed in place.
•
Extend only one component at a time from the rack.
•
Do not overload the AC supply branch circuit that provides power to the rack. The
total rack load should not exceed 80 percent of the branch circuit rating.
•
Ensure that proper airflow is provided to components in the rack.
•
Do not step on or rest weight on a BSC installed in the rack.
BlueSecure™ Controller Setup and Administration Guide
Safety Precautions
2-3
Advertisement
Table of Contents
