Table of Contents
Advertisement
The DHCP Vendor Classes dialog appears.
Click Add... and the New Class dialog appears, for example.
2.
Enter a meaningful Display name and Description, and then enter the string
3.
(BlueSecure.AP1500) that the DHCP client on the BSAP will send to the DHCP server.
Click below in the ASCII section, and type the string BlueSecure.AP1500. The
Hexadecimal string will be created automatically.
BlueSecure™ Controller Setup and Administration Guide
Figure B-2: Defining the BSAP Vendor Class
Figure B-3: Entering DHCP Vendor Class Information
B-3
Advertisement
Table of Contents
