Table of Contents
Advertisement
In the Option Type dialog:
4.
a)
b)
c)
d)
e)
Click OK to finish the definition of Options and Values.
5.
Configure the
Right click on the DHCP server in the navigation tree, and then select New Scope...
1.
Option for the
to define the BSAP IP address scope.
BSAP DHCP
After you have created the scope, right-click on Scope Options in the navigation tree
2.
address scope
to configure the Options.
The Scope Options dialog appears, for example:
3.
Click the Advanced tab, and then select BlueSecure.AP1500 from the Vendor class
drop-down menu. The predefined option is listed as an available option.
In the ASCII text field, enter the IP addresses of the BSCs (separated by a comma or
4.
semicolon) to which the BSAPs defined in the address scope are to connect. Be sure
to delete the leading period that is pre-inserted in the field.
BlueSecure™ Controller Setup and Administration Guide
Enter a descriptive name in the Name field.
Select Encapsulated for the Data type.
Enter 127 for the Code Value.
Enter a meaningful description in the Description field.
Click OK to return to the Predefined Options and Values dialog.
Figure B-7: Configuring Scope Options
Figure B-8: The Scope Options Dialog
B-5
Advertisement
Table of Contents
