Figure 4-14: Dhcp Settings For New Managed Remote Subnet Page - ADTRAN BlueSecure Controller Setup And Administration Manual

•
•
•
5. Optional. Using the IP Range Assignments table, define role assignments for devices/
users that have been assigned static IP addresses as they connect to the BSC on the
managed remote subnet. Enter a range of IP addresses using the From and To fields.
Optional. Using the Custom User Login drop-down menu, specify which login page
6.
to display to users logging into the BSC on the managed remote subnet—the default
user login page or a customized page you have defined. See "Customizing the User
Login Page" on page 11-2 to learn how to create a customized user login page.
Click Save to save the settings to the BSC database. Click Save and create another to
7.
continue creating Managed Remote Subnets. Click Next to set up the DHCP
parameters on the DHCP settings for new Managed Remote Subnet page as shown in
Figure 4-14.
a)
BlueSecure™ Controller Setup and Administration Guide
Netmask of Remote Subnet - When handing out addresses to wireless clients via
DHCP, the BSC must include the clients' netmask address. This is the netmask
address that is assigned to clients on the managed remote subnet.
Additional IP addresses that DHCP relay packets can be sourced from - Used
only for HSRP, put all the physical router addresses here (a comma separated list
of additional DHCP relay endpoints).
NAT the addresses to the protected interface address - Mark this checkbox to
map all client IP addresses on the managed remote subnet to the IP address of
the BSC protected interface.
If this checkbox is cleared, NAT is disabled.
Substitute IP address for remote clients NAT - If you have marked the preceding
NAT checkbox, and you want remote subnets to use a substitute NAT IP instead
of protected interface address, enter the substitute NAT IP in this field. This allows
you to determine the point of origin for traffic originating in a remote subnet.

Figure 4-14: DHCP Settings for New Managed Remote Subnet Page

Configure the BSC DHCP server settings, as appropriate for your network:
Configuring the BSC Managed Interface
4-21