Table of Contents
Advertisement
Chapter 14: Secure Mobility® MatriX
If you are supporting VoIP, make sure that you override the replicated IP addresses for
2.
the SpectraLink/Avaya gateway and SVP server. See "Configuring Vendor-specific IP
Phone Support" on page 9-2 for VoIP details.
Click Save to save the BSC Replication Override settings to the BSC database.
3.
Restart the BSC to enable the replication override.
4.
Tracking Replication Status
You can track the status of the replication configuration from the Replication Master and
any Replication Node.
There are two means of tracking replication status. You can click Mobility MatriX/
Replication Setup to display the following status information on the Replication Master:
•
Total enabled nodes - Number of nodes that have been enabled. Nodes are enabled
via the Enable node checkbox on the Edit the replication node page.
•
Synchronized nodes - Number of Replication Nodes that have received the latest
replication update from the Master.
•
Unsynchronized Nodes - Number of Replication Nodes that have not received the
latest replication update from the Master.
•
Unresponsive Nodes - Number of Nodes that have not responded to a status request
from the Master.
•
Nodes that did not acknowledge the receipt of changes - Number of Nodes that
requested a replication update but did not confirm that it was received.
•
ID of last distributed update - Internal ID of replication update that was most recently
distributed.
•
Number of undistributed updates - Count of updates to distribute from Replication
Master to Nodes.
Clicking Mobility MatriX/Replication Setup from a Replication Node will display the
latest communication exchange between the Node and the Master. For example:
Current Status with the Master:
Last API Log ID sent by the master: 14
Last message sent back to the master: [New Snapshot]
You can also click Mobility MatriX/Replication Nodes from a Replication Master or Node
to display a tabular listing of BSCs comprising the replication configuration. The
displayed information includes:
•
Actions - Edit the BSC's replication configuration or delete the BSC from the
replication configuration.
•
Enabled - Is replication enabled on the BSC? Yes or no.
•
Address - IP address of Replication Node or Master.
•
Model - BlueSecure Controller model number, e.g. BSC-2100.
•
Version - System software version the BSC is running.
•
Recent Status - Lists any error message returned from a Node following receipt of
"heartbeat" query from the Master.
•
Last Update - ID of last status update.
•
Last Update Message - Last message concerning replication configuration update.
•
Last Requested Update - ID or update last requested by Node.
14-16
Advertisement
Table of Contents
