Creating A User Location; Creating User Location Groups; Figure 8-18: Create A User Location Page - ADTRAN BlueSecure Controller Setup And Administration Manual

Chapter 8: Roles and Role Elements
For example, you might have defined "VLAN 15" that includes all access points on the
shop floor. You can then create a location called Shop Floor that maps VLAN 15 to the
location. After you create the location, you can then select it from the drop-down list when
defining a network usage policy in a role. For example, you can create a policy that
allows Telnet sessions only when the user is connected to the BSC from an access point in
the Shop Floor (VLAN 15) location.
Note: For more information on setting up VLANs, see "Creating a VLAN on the Protected
Side (Optional)" on page 4-5 and "Creating a VLAN on the Managed Side of Your
Network" on page 4-17.
After defining locations, you can organize them into location groups. Using location
groups can streamline role administration, by enabling you to apply one policy to the
entire location group rather than creating a separate policy for each individual location.
See "Defining User Roles to Enforce Network Usage Policies" on page 8-2 for more on
defining roles and network usage policies.

Creating a User Location

To define a user location:
1. Click the User Roles tab in the BSC administrator console, and then click the
Locations tab.
Select User Location from the Create drop-down list on the Schedules page.
2.
The Create a location page appears as shown in Figure 8-18.
Enter a meaningful name for the user location in the Name field. Defaults to the value
3.
in the VLAN ID field.
Enter the VLAN ID that identifies the user's logical location In the VLAN ID field.
4.
5. Click Save to store the information to the BSC database or Save and create another
to continue defining user locations.
You might be prompted to restart the BSC. We recommend that you do not restart the
BSC until you have completely finished configuring the BSC for use in your network.

Creating User Location Groups

Create groups of user locations to enable you to easily enforce network usage policies
based on the user locations associated with a user's assigned role.
To create a location group:
8-20

Figure 8-18: Create a User Location Page