Figure 14-25: Status Summary For An Operational Lsg; Figure 14-26: Status Summary For A Load Sharing Failover Event; Figure 14-23: Load Sharing Setup On The Load Sharing Node; Figure 14-24: Verifying The Load Sharing Failover Event - ADTRAN BlueSecure Controller Setup And Administration Manual

Load Sharing

Figure 14-23: Load Sharing Setup on the Load Sharing Node

Figure 14-24: Verifying the Load Sharing Failover Event

Load Sharing Status Summary
You can also display a quick visual snapshot of your configured Load Sharing Group by
clicking Status/Summary, and then clicking the Loadsharing link at the top of the page.
The status summary for a three-node Load Sharing Group that is up and fully operational
would look similar to this:

Figure 14-25: Status Summary for an Operational LSG

The sample status summary shown in the following figure indicates that Load Sharing
Node 2 has failed over to Load Sharing Node 1.

Figure 14-26: Status Summary for a Load Sharing Failover Event

14-25
BlueSecure™ Controller Setup and Administration Guide