2.
Mark the Enable Autocontainment checkbox to enable RF autocontainment.
3.
Enter the duration (in minutes) that the BSC will perform active containment on the
rogue device in the Autocontainment Duration field.
Click Save to save the autocontainment settings to the BSC database.
4.
See "Monitoring Devices in RF Autocontainment" on page 15-7 for information about
displaying a list of devices currently in active containment.
BlueSecure™ Controller Setup and Administration Guide
Figure 13-4: Autocontainment Configuration Page
Configuring Autocontainment
13-7