Table of Contents
Advertisement
Chapter 2: Installation
Overview of the Installation Procedure
You must complete the following steps to install the Bluesocket BSC:
1.
Prior to beginning the installation procedure, familiarize yourself with the safety
considerations listed started in "Safety Precautions" on page 2-2.
Familiarize yourself with the BSC front- and rear-panels as described starting in "BSC-
2.
2200/3200/5200 Displays, Controls, and Connectors" on page 2-4.
Ensure that you have completed the prerequisite steps listed in "BSC-600 Controls
3.
and Connectors" on page 2-8 to prepare your network before attempting to install
and connect the BlueSecure Controller.
Evaluate your site and select a suitable location in which to install the Bluesocket
4.
BSC. The selected installation location must meet the environmental, rack, and power
requirements listed in "Environmental, Rack, Space, and Power Requirements" on
page 2-10.
Mount the BSC chassis in the selected installation location as described in "Mounting
5.
the BlueSecure Controller Chassis" on page 2-10.
Connect the BSC to your network by connecting cables to:
6.
•
•
•
Connecting the BSC to your network is detailed in "Connecting the BlueSecure
Controller to Your Network" on page 2-13.
7.
Connect the BSC to an appropriate AC power source and power it up as described
in "Connecting the BSC to its Power Source" on page 2-13.
Optional. Enable Power over Ethernet support on the BSC-600's four front-panel
8.
Managed ports by following the procedure given in "Enabling Power over Ethernet
on the BSC-600 and BSC-1200" on page 2-14.
Safety Precautions
The Bluesocket BSC has been listed by Underwriters Laboratories (UL) and is shipped
from the factory in a safe condition.
This section provides information and procedures that must be followed to ensure safe
installation and operation of the Bluesocket BSC.
Caution: Observe the following precautions when installing or servicing the BSC:
•
The power supply in the Bluesocket BSC chassis may produce safety extra low
voltage (SELV) or low voltage energy hazards that can cause physical injury. Never
remove the BSC chassis cover to access any of the components inside the chassis.
•
Observe and follow service markings and labels on the BSC equipment. Access and
service BSC equipment only as instructed in your Bluesocket user documentation.
•
If any of the following conditions occur, disconnect the BSC equipment from all
power sources, and contact Bluesocket, Inc.:
-
-
-
•
Keep the Bluesocket BSC away from radiators and heat sources. Do not block the
ventilation holes in the Bluesocket BSC chassis.
2-2
protected side
establish a link to the
managed side
establish a link to the
optionally establish a link to another Bluesocket BSC for failover operation.
the equipment power cable or connector is damaged
an object has fallen into the equipment
the equipment has been exposed to water
of the network
of the network
Advertisement
Table of Contents
