Table of Contents
Advertisement
The Manage Patches for BSC page appears as shown in Figure 16-6.
Any previously installed patches are listed in the Installed Patches listbox.
Use the Browse button to enter the pathname where the patch file resides on your
2.
local computer in the Upload new patch field.
Click Install Patch to install the patch on the BSC.
3.
The Installed Patches listbox will list the name of the patch when the installation is
complete. To view patch information, such as release number and date, highlight the
patch in the box, and then click View.
Note: Patches do not take effect until the BSC is rebooted.
Uninstalling a Patch
You may need to uninstall a patch if it doesn't provide the functionality updates you need
for your BSC.
To uninstall a patch:
Click the Maintenance tab in the administrator console, and then click Patch.
1.
The Manage Patches for BSC page appears as shown in Figure 16-6.
Select the patch that you want to uninstall in the Installed Patches listbox.
2.
Click Uninstall to remove the patch from the BSC.
3.
Switching Between BSC Runtime Software Versions
It is possible to switch between the currently active and standby versions of the BSC
runtime image. For example, if you find there is a problem with a recently uploaded
runtime image, use this function to switch back to the standby image.
To switch between software runtime images:
Click the Maintenance tab in the administrator console, and then click Switch.
1.
The BSC Switch Tool page appears as shown in Figure 16-7.
The current active runtime image, either A or B, is shown in boldface on the right side
of the page.
In the Destination panel, mark the radio button corresponding to the image, either A
2.
or B, that you want to switch to.
BlueSecure™ Controller Setup and Administration Guide
Switching Between BSC Runtime Software Versions
Figure 16-6: Manage Patches for BSC Page
16-9
Advertisement
Table of Contents
