The SSL Certificate Generation page appears as shown in Figure 11-17.
Click Browse in the Key Upload section to locate the private key on your computer.
2.
Click Process to upload the key to the BSC.
3.
Renewing a Custom SSL Certificate
A custom SSL login certificate is only valid for a finite period of time. To renew it, you
would normally need to delete the certificate on the BSC, then submit another CSR
request and wait until the provider issues a new certificate.
However, the BSC allows you to submit a request for a new certificate without deleting
the current one. Upon receipt, you can then switch to the new certificate without any
downtime.
The procedure for renewing a certificate is the effectively the same as that described in
"Installing a Custom SSL Login Certificate" on page 11-22. Note that after you upload
the new certificate, you must click Switch! to activate the new certificate.
To renew a custom SSL certificate:
Click the Web Logins tab in the administrator console, then click the SSL Certificate
1.
tab, then click Renewal Setup.
The SSL Certificate Generation page appears (see Figure 11-13).
Follow the procedure given in the section entitled "Installing a Custom SSL Login
2.
Certificate" on page 11-22.
Click Switch! after you have uploaded the new certificate to the BSC to activate the
3.
new certificate.
BlueSecure™ Controller Setup and Administration Guide
Figure 11-17: SSL Certificate Generation Page
Installing a Custom SSL Login Certificate
11-27