Table of Contents
Advertisement
Chapter 10: General BSC Operational Settings
Root CA URL - URL where the certificate authority (CA) credential is stored. Your browser
can use the CA to establish that the BSC web server is a trusted source for data.
Default value: https://secure.bluesocket.com/root-ca-2.crt
Admin Login
Admin web server port - Use to block admin access at the interface level. The default port
Options
is 443. If the value is different than 443, the web server will listen on the new port and
deny access via port 443 to the admin entry points. For example, if you specify port
8083, admin access is available at https://IP:8083/admin.pl.
Admin Access Allow Control List - Limits administrator login page access (and
administrator web browser functions) to those clients with IP addresses that are listed
here. You can also list partial addresses to indicate an entire address space. Use a
comma between each single address or address space. Default value: all (no IP address
restrictions).
Example 1: To admit IP address 10.1.1.1 only, enter 10.1.1.1
Example 2: To admit IP addresses 10.1.1.1 and 10.1.1.3 only, enter 10.1.1.1,10.1.1.3
Example 3: To admit all IP addresses in 10.1.1.0 through 10.1.1.255, enter 10.1.1.
Caution:
to block administrative access to the BSC if you enter incorrect information.
Disable access to the BSC API - Mark this checkbox to disable access to and use of the
BSC application programming interface.
Default
Language code and Character set - Specify the language for the BSC's console. The
Language
default language is English with a character code of en and a set of ISO-8859-1.
The BSC provides multi-byte character set support to enable the use of Asian languages.
Catalan, Chinese (Simplified), Chinese (Traditional), Czech, Dutch, English, French,
German, Italian, Japanese, Korean, Portuguese, Spanish, and Swedish.
Possible language code and character set settings are:
•
Catalan (ca/ISO-8859-1)
•
Chinese-Simplified (zh-CN/GB2312)
•
Chinese-Traditional (zh-TW/Big5)
•
Czech (UTF-8)
•
Dutch (UTF-8)
•
English (en/ISO-8859-1)
•
French (fr/ISO-8859-1)
•
German (de/ISO-8859-1)
•
Italian (it/ISO-8859-1)
•
Japanese (ja/EUC-JP)
•
Korean (ko/EUC-KR)
•
Portuguese (pt/ISO-8859-1)
•
Spanish (es/ISO-8859-1)
•
Swedish (sv/ISO-8859-1)
Note: The BSC will save configuration data using the character set you specify here, so
for example, if enable a Chinese character set, LDAP data from the BSC will be sent in
Chinese.
10-4
Be careful about the values you enter for this option, as it is possible
Advertisement
Table of Contents
