Table of Contents
Advertisement
Chapter 16: Maintenance
Note: When importing values, the BSC shows the values before it adds them to the
configuration information. It will give you warnings about any records it cannot accept
because they would conflict with the data in existing records (such as two records with
the same MAC address or user name). You can edit the values to correct problems before
they are finally added. The new records are not actually added until you confirm them.
Exporting BSC Log Records
Use Log Record Export to export the contents of the BSC event log to CSV format for
record keeping. You can either export all logged events or a specified number of them.
To export BSC log records:
Click the Maintenance tab and then click the Log Record Export tab.
1.
The BSC log record export page appears as shown in Figure 16-11.
2.
Mark the All Records radio button to export all logged events, or mark the n records
radio button along with the Previous 1000 Records, Previous 2000 Records, or
Previous 3000 Records radio button to export that number of the most recently
logged events.
Click Export.You are then prompted to display or save the file.
3.
4.
Click Save to the save the CSV-formatted file.
Licenses
This section explains licensing for:
•
BlueProtect
•
BSC
•
BSAP 1840
Licensing is configured on the Manage Licenses page. To display this page, click the
Maintenance tab and then click Licenses. For example:
16-12
Figure 16-11: BSC Log Record Export Page
Advertisement
Table of Contents
