Table of Contents
Advertisement
User connections are displayed on the horizontal axis and data throughput on the vertical
axis. Note the following about the graphical monitor display:
•
Secure connections are shown as a solid cylinder (not shown in the example) and
non-secure connections as a hollow tube with a center rod. Place the mouse pointer
over a connection to display more information about it.
•
The role assigned to each user is color-coded. Consult the key on the right side of the
screen for easy role identification.
•
Current throughput is displayed in a solid color and average throughput in a paler
version of the same color. For example, current throughput for the bluesocket.com
user connection on the left side of the graphic above is about 4.75 Mbps and
average throughput is slightly under 1 Mbps.
•
To change the scale of throughput, click the Throughput icons in the top left corner of
the screen. Click the grey bars to modify the displayed throughput from kbps to Mbs.
•
To change the number of users displayed, click the Users icons in the bottom right
corner of the screen. Click a larger bar to display more users. The display of user
connections is limited to ten per screen. To see previous or subsequent screens of
users, click the left and right arrows at the bottom of the screen.
Filtering Users
The BSC graphical monitoring tool provides filters that enable you to limit the display of
user connections to those users who:
•
connect to a particular access point or access points
•
are assigned to a particular role
•
pass data through the BSC at a particular throughput range
Use the filters alone or in combination with each other to limit the display of user
connections.
To limit display of user connections to specific users:
Click Filter Users at the bottom of the monitor screen. The Filter Users dialog appears
1.
as shown in Figure 15-7.
Select one or more filters from the Access Point, Role, or Throughput drop-down lists.
2.
The users that pass through the filters are listed in the Users list. You may select some
or all of the users listed in the Users list for display in the monitoring tool.
BlueSecure™ Controller Setup and Administration Guide
Monitoring Active User Connections
Figure 15-7: Filter Users Dialog
15-9
Advertisement
Table of Contents
