Table of Contents
Advertisement
Chapter 16: Maintenance
Un-registered;1;Allow;Any;Any;Outgoing;192.168.100.18/
255.255.255.255;Any;Any;
Un-registered;1;Allow;Any;Any;Outgoing;abc.go.com/
255.255.255.255;Any;Any;
Un-registered;1;Allow;Any;Any;Outgoing;www.google.com/
255.255.255.255;Any;Any;
Guest;2;Allow;TCP;53;Outgoing;0.0.0.0/0;Any;Any;
Guest;2;Allow;UDP;53;Outgoing;0.0.0.0/0;Any;Any;
Guest;2;Allow;Any;Any;Outgoing;0.0.0.0/0;Any;Any;
Export BSAP-1840 Licenses
This exports the list of BSAP-1840 802.11n licenses on the BSC.
Upgrading to a New Version of Runtime Software
The BSC contains two runtime software images, A and B. One runtime image is active
and the other image is in standby mode. When Bluesocket releases a new runtime
version of BSC software, you will need to upload it to the BSC machine. When you
upload a new runtime image, that image becomes the new active image and the old
image becomes the standby image.
This section is organized as follows:
•
Upgrading a Single BSC Network
•
Upgrading Multiple BSCs in a Replication Configuration
Upgrading a Single BSC Network
The BSC contains two runtime software images, A and B. One runtime image is active
and the other image is in standby mode. When you upload a new runtime image, the
runtime image that was active becomes the standby image, and the uploaded runtime
image becomes the new active image.
Note: Be sure you know the password for the admin account before upgrading the BSC
to a new software image. After uploading the new software image to the BSC, you will
be able to login to the BSC administrator console using only the default admin
administrator account.
To install a new runtime image on a single BSC network:
Copy the new BSC software image file to the computer on which you are running
1.
your web browser.
Back up your BSC database as described in "Backup" on page 16-3.
2.
16-6
Advertisement
Table of Contents
