Logging Out Of The Administrator Console; Using And Managing Administrator Accounts; Figure 3-2: The Bsc Administrator Console - ADTRAN BlueSecure Controller Setup And Administration Manual

5. Acknowledge A dialog appears displaying the Bluesocket End User License Agreement. Read and
License acknowledge the license agreement, and then close the dialog.
Agreement
6. Change Change your password when prompted to do so.
Password
Enter the default password in the Password field, your new password in the New
Password and Re-Enter New Password fields, and then click Log in >.
The Bluesocket BSC administrator console appears as shown in Figure 3-2.
Note: Be sure to store your BSC admin account password in a safe location. You will not
be able to log into the BSC administrator console without it. If you should forget or lose
your password, you must access the BSC serial port as described in "Serial Port Access to
Essential Functions" on page D-1 and then issue the admin password recovery command
to reset the default admin account to its default password.

Logging Out of the Administrator Console

After you finish configuring the BSC, you can log out from any console page by clicking
the Sign Out link that appears at the top of the page.

Using and Managing Administrator Accounts

After you have logged into the BSC administrator console for the first time, installed the
Bluesocket SSL Certificate on your web browser host, and changed the password
associated with the default admin account, subsequent logins use one of the following
two pre-defined administrator accounts:
• admin - enables you to view and change all BSC setup parameters.
BlueSecure™ Controller Setup and Administration Guide
Using and Managing Administrator Accounts

Figure 3-2: The BSC Administrator Console

3-3