Table of Contents
Advertisement
Chapter 10: General BSC Operational Settings
If cleared, no connection tracking data is logged. Default value: Disabled.
Note: Connection tracking can potentially generate a large amount of data,
proportional to the number of users and WLAN traffic.
•
IP address or FQDN of remote connection tracking syslog server - Enter the IP
address(es) or fully qualified domain name(s) of up to two syslog server(s) here to log
connection tracking data.
•
Facility of remote connection tracking syslog server - Enables you to specify the
facility level to send to the syslog server(s) on connection tracking syslog messages.
Default value: local0.
•
Maximum severity to send RF IDS alarms to syslog - Determines which alarms should
be forwarded to the syslog. The default is None. The possible values are None,
Informational, Warning, or Severe.
Application
Mark the radio buttons to control the detail level of event logging to be generated for
Logging
each BSC process or function. For example, select Critical to record Critical, Alert, and
Emergency level events and exclude the rest.
BSC System - System events such as memory, CPU and disk space.
BSC Processes - Specific process (such as HTTP and SNMP) starts and stops.
BSC Configuration - Configuration changes made to the BSC.
User Tracking - Total number of users logged into the BSC.
Database - BSC internal database activity.
Firewall - Activity concerning setup or changes to the BSC firewall.
PPTP Tunneling - Activity of PPTP tunnels.
L2TP Tunneling - Activity of L2TP/IPSec tunnels.
PPTP/L2TP Authentication - Authentication process for PPTP or L2TP/IPSec.
IKE Authentication - Internet key exchange (IKE) authentication portion of IPSec.
DHCP Server - DHCP activity of the BSC's DHCP server.
DHCP Relay Server - DHCP activity of DHCP relay server.
Web Server - Activity of the BSC's login/admin web server.
Generic LDAP/RADIUS Auth - Authentication activity of LDAP/Active Directory or RADIUS
servers.
Windows Transparent Auth - Authentication activity when using a Windows Transparent
login.
802.1x Authentication - Authentication activity when using 802.1x authentication.
Mobility - Secure Mobility
Connection Manager Daemon - User connection activity.
Intrusion Detection - Intrusion Detection System (IDS) activity.
Power over Ethernet - BSC-600 only.
Bluesocket Access Points - BSAP 1500 activity.
Saving the
Click Save to save the log settings to the BSC database.
settings
You may be prompted to restart the BSC. We recommend that you do not restart the BSC
until you have completely finished configuring the BSC for use in your network.
10-16
®
activity.
Advertisement
Table of Contents
