Table of Contents
Advertisement
Chapter 10: General BSC Operational Settings
Miscellaneous BSC Options
Use the Miscellaneous page in the administrator console to configure miscellaneous BSC
options including.
Displaying the
To configure miscellaneous BSC options:
Miscellaneous
Click the General tab in the BSC administrator console, and then click the Miscellaneous
settings page
tab.
The Miscellaneous settings page appears as shown in Figure 10-15.
Connection
Time in seconds before idle connection are timed out - Idle connections will be dropped
Tracking
once the idle connection time out has been reached. Idle connections will not be dropped
if this value is set to zero.This value must equal or exceed the DHCP lease time when the
BSC DHCP server is enabled.This value should be set to 60 seconds or greater. The
default value is 600 seconds.
Note: Idle users with static IP addresses (i.e. no traffic, no DHCP renew), even though
connected, will be dropped once the time out has been reached.
Time in minutes between updating internal status - Time interval at which the BSC collects
status data on its internal systems and processes and updates the throughput statistics on
10-24
Figure 10-15: Miscellaneous Settings Page
Advertisement
Table of Contents
