Configure Management Access; Configure Http Settings - NETGEAR XS708T User Manual

XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Management Security > SCC Control.
The NETGEAR Smart Control Center (SCC) Utility page displays.
6. Select one of the following radio buttons:
• Enable. Access to the SCC utility is enabled. The default is Enable.
• Disable. Access to the SCC utility is disabled. Although you still can use the SCC
utility to discover the switch in the network. you cannot configure the switch through
the SCC utility. Disabling access to the SCC utility improves the switch security.
7. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.

Configure Management Access

From the Access menu, you can configure HTTP and secure HTTP access to the switch
management interface. You can also configure access control profiles and access rules.

Configure HTTP Settings

Use the HTTP Configuration page to configure the HTTP settings on the system.

To configure the HTTP server settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Access > HTTP > HTTP Configuration.
Change the Default IP Address of the
Manage Device Security
282