Configure Management Access; Configure Http Settings - NETGEAR ProSafe XS728T User Manual

ProSAFE 10-Gigabit Smart Managed Switch XS728T and XS748T User Manual

Configure Management Access

You can configure HTTP and secure HTTP access to the switch management interface. You
can also configure access control profiles and access rules.
From the Security > Management Security > Access menu, you can access the pages that
are described in the following sections:
•

Configure HTTP Settings

• Configure HTTPS Settings
• Manage the Certificate
• Configure Access Control
Configure HTTP Settings
Use the HTTP Configuration page to configure the HTTP settings on the system.

To configure the HTTP server settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 10.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Access > HTTP > HTTP Configuration.
6. In the HTTP Session Soft Timeout field, specify the number of minutes an HTTP session
can be idle before a time-out occurs.
The value must be in the range of 0–60 minutes. The default value is 10 minutes. The
currently configured value is shown when the web page is displayed.
on page 242
on page 243
on page 244
on page 247
Manage Device Security
242
Change the Default IP Address of the