Config.security.authentication.interface.serial.enhancedauth; Config.security.authentication.interface.show - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

config.security.authentication.interface.serial.enhancedAuth

Syntax
Purpose
Parameters
Command Example

config.security.authentication.interface.show

Syntax
Purpose
Parameters
enhancedAuth enhancedAuthState
This command sets the enhanced serial authentication state.
Enhanced Serial Authentication will require a user to enter a
password when gaining access to the serial port interface.
This command has one parameter:
enhancedAuthState
Root> config security authentication serial enhancedAuth
enable
show interface
This command displays the settings in the local authentication
database for a single interface.
NOTE: The SANtegrity Authentication feature key must be installed to view
the eport and nport information, and the OSMS information.
This command has one parameter:
interface The interface that will be displayed. Valid
values for this parameter are:
cli
web
osms
api
serial
eport
nport
This parameter enables and disables
enhanced authentication on the serial port
interface. Accepted values for this
parameter are enable or disable. Boolean 1
and 0 values may also be substituted.
config
CLI Commands
2-41
2