Config.switch.webstate; Config.switch.zoneflexpars; Config.switch.zoningrscn - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

config
2

config.switch.webState

Command Example

config.switch.zoneFlexPars

Command Example

config.switch.zoningRSCN

E/OS Command Line Interface User Manual
2-106
Syntax
webState webEnabledState
This command sets the state of the web interface. When disabled,
Purpose
access through the web interface will be turned off.
This command has one parameter:
Parameters
webEnabledState
Root> config switch webState enable
Syntax
zoneFlexPars zoneFlexParstate
This command configures the state of Zone FlexPars.
Purpose
This command has one parameter:
Parameters
zoneFlexParsState
Root> config switch zoneFlexPars fabric
Syntax
zoningRSCN
This command sets the state of Zoning RSCNs.
Description
This parameter can be set to enable or disable.
Boolean 1 and 0 values may also be
substituted.
This parameter can be set to fabric and none.
When set to fabric, RSCNs will only be sent to
affected fabric members when zoning
information changes. When set to none,
filtering of RSCNs will not take place, and
RSCNs will be sent to all zoneset members
when zoning information changes.
zoningRSCNState