McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 317

Diagnostics cannot be run on an active E Port.
Description
Block the port to run diagnostics.
Action
Message Error 222: Invalid SNMP Community Index
The value entered for the SNMP community index is invalid.
Description
The SNMP community index must be an integer in the range 1–6.
Action
Make the appropriate changes and re-submit the command.
Message Error 223: Unknown Error
The switch did not accept the request.
Description
Contact your service representative.
Action
Message
Error 224: Invalid Argument
One or more parameters are invalid for this command.
Description
Consult this manual (Chapter 2, CLI Commands) for appropriate
Action
parameter names. Parameters must be typed exactly to specification
to be recognized correctly by the CLI.
Message
Error 226: Argument Is Too Long
One or more parameters are invalid for this command.
Description
For the appropriate parameters, see the section of the manual that
Action
corresponds to the attempted command. Parameters must be typed
exactly to specification to be recognized correctly by the CLI.
Message
Error 227: Invalid SNMP Community Name
The value entered for the SNMP community name is invalid.
Description
Error Messages
A-33
A