Show.snmp.targettable - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

show
2

show.snmp.targetTable

Command Example
Output Example
SNMPv3 State:
Index Target IP
----- -------------
1 172.19.16.169
2
3
4
5
6
E/OS Command Line Interface User Manual
2-224
Security Model
Security Level
Read View
Write View
Notify View
Config.SNMP> showAccessTable 1
Index:
Security Model:
Security Level:
Group Name:
Read View:
Write View:
Notify View:
NOTE: The command
functionality that is the same as this command.
Syntax
tagetTable [index]
This command displays the configured values for the Target Table.
Purpose
This command has one optional parameter:
Parameters
Root> show snmp tagetTable
The output from the show.snmp.targetTable command appears as
follows:
Enabled
UDP Port
--------
162
The security model.
The security level.
The read view name.
The write view name.
The notify view name.
1
Any
None
group1
fcmgmt_3_1
fceos
internet
config.snmp.showAccessTable
Community
---------------------------------
public
on page 22-89 has the
MP Model
--------
SNMPv1