Show.port.opticdata - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Output Example
FCAddr BB Crdt RxFldSz
------ ------- -------
612902 10
612903 10 2112
612904 10
612905 10
6129AB 8 2112
6129AC 10
6129AD 8
6129AE 10
6129FD 10
6129FE 10

show.port.opticData

Syntax
Purpose
Parameters
Command Example
The show.port.nodes command output for a mix of public and private
nodes on a loop appears as follows:
COS Port Name
--- -----------------------
2,3 00:11:22:33:44:55:00:77
2 00:11:22:33:44:55:00:77
2,3 00:11:22:33:44:55:00:77
2,3 00:11:22:33:44:55:00:77
2 00:11:22:33:44:55:00:77
2,3 00:11:22:33:44:55:00:77
2,3 00:11:22:33:44:55:00:77
3 00:11:22:33:44:55:00:77
2,3 00:11:22:33:44:55:00:77
2,3 00:11:22:33:44:55:00:77
opticData portNumber
This command shows the overall optic health, enhanced digital
diagnostic data, and the thresholds for the specified port. At the end
of this display, it will show which measurements have exceeded their
thresholds.
This command has one parameter.
portNumber The port number whose data will be
displayed. Valid values are:
0-15 for the Sphereon 3016
0-15 for the Sphereon 4400
0-31 for the Sphereon 3032
0-31 for the Sphereon 4700
0-63 for the Intrepid 6064
0-143 for the Intrepid 6140 (128-131 are
inaccessible)
0-23 for the Sphereon 4500
0-11 for the Sphereon 4300
Show.Port> opticData 5
Node Name
-----------------------
20:11:22:33:44:55:66:77
20:11:22:33:44:55:66:77
20:11:22:33:44:55:66:77
20:11:22:33:44:55:66:77
20:11:22:33:44:55:66:77
20:11:22:33:44:55:66:77
20:11:22:33:44:55:66:77
20:11:22:33:44:55:66:77
20:11:22:33:44:55:66:77
20:11:22:33:44:55:66:77
CLI Commands
show
2
2-203