Show.thresholdalerts.alerts - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

show.thresholdAlerts.alerts

Syntax
Purpose
Parameters
Command Example
Output
alerts
This command provides the name, type, and enabled state of each
configured threshold alert, including both counter threshold alerts
(CTAs) and throughput threshold alerts (TTAs).
This command has no parameters.
Root> show thresholdAlerts alerts
The threshold alert data appears as a table that includes the following
properties:
Name The name of the threshold alert, truncated to 45
characters.
Type The trigger statistic or threshold type of the alert
(abbreviated to 17 characters). These include:
Tx Util
Rx Util
Tx/Rx Util
Link Resets Sent
Link Resets Received CTA - Link Resets
OLS Sent
OLS Received
Link Failures
Sync Losses
Signal Losses
Protocol Errors
Invalid Tx Words
TTA - Transmit Utilization.
TTA - Receive Utilization.
TTA - Transmit or Receive
Utilization.
CTA - Link Resets Sent.
Received.
CTA - OLS Sent.
CTA - OLS Received.
CTA - Link Failures.
CTA - Sync Losses.
CTA - Signal Losses.
CTA - Primitive Sequence
Errors/Protocol Errors.
CTA - Invalid Tx Words.
CLI Commands
show
2
2-235