McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 296

A
E/OS Command Line Interface User Manual
A-12
Reduce the number of members in one or more zones and re-submit
Action
the command.
Message Error 077: Not Allowed While Port Is Failed
The port selected is in a failed or inactive state, or is in need of
Description
service.
Consult the installation/service manual for appropriate action.
Action
Message Error 078: System Error Light On
This unit is not able to beacon because the system error light is on.
Description
You must clear the system error light before unit beaconing may be
Action
enabled. Consult the installation/service manual for appropriate
action.
Message Error 079: FRU Failed
The specified FRU has failed.
Description
Consult the installation/service manual for appropriate action.
Action
Message Error 081: Default Zone Enabled
The request cannot be completed because the default zone is enabled.
Description
Disable the default zone and re-submit the command.
Action
Message Error 082: Invalid Interop Mode
The value entered for the interoperability mode is not valid.
Description
The interoperability mode for the director or switch must be mcdata
Action
(McDATA Fabric 1.0) or open (Open Fabric 1.0). Make the
appropriate changes and re-submit the command.