show
2
show.auditLog
Command Example
E/OS Command Line Interface User Manual
2-168
•
show.features
•
show.security.portbinding
•
show.security.switchbinding
•
show.security.fabricbinding
•
show.openTrunking.config
•
show.thresholdAlerts.alerts
•
show.fabric.topology
•
show.fabric.nodes
•
show.security.switchACL
•
show.ficonCUPZoning
•
show.FencingPolicies
Syntax
auditLog [clear]
This command displays the entries of the audit log after the last time
Purpose
the log was cleared.
This command has one optional parameter:
Parameters
clear
show auditLog
The output from this command displays the following data:
Output
Date/Time
Action
Source
User ID
Adding the optional clear parameter removes
all entries from the log. If the log is full, it will
resume collecting log entries.
The date and time of the log entry.
Type of audit log event.
Source of audit log event.
Identifier of the user that made the
command. Usually an IP address.