Config.fencing.setparams - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual
Fw 08.01.00 mcdata e/os command line interface user manual (620-000134-740, november 2005)
Hide thumbs
Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
- Manual (684 pages) ,
- Installation and service manual (612 pages) ,
- User manual (312 pages)
Table of Contents
Advertisement
Parameters
Command Example
config.fencing.setParams
Syntax
Purpose
This command has two parameters:
name
The name of the fencing policy.
portNumber
The port number to remove from the fencing
policy, or all, which will remove all of the
individual ports from the fencing policy.
0–11 for the Sphereon 4300
0–15 for the Sphereon 3016
0-15 for the Sphereon 4400
0–23 for the Sphereon 4500
0–31 for the Sphereon 3032
0–31 for the Sphereon 3232
0-31 for the Sphereon 4700
0–63 for the Intrepid 6064
0–127 and 132–143 for the Intrepid 6140
Root> config fencing removePort 24
setParams name typeNumber limit period
This command sets the type, limit, and period values for the specified
fencing policy.
config
CLI Commands
2-13
2
Advertisement
Table of Contents
