Show.snmp.accesstable - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Output Example

show.snmp.accessTable

Syntax
Purpose
Parameters
Command Example
Output Example
The output from the show.security.switchBinding command appears as
follows:
Switch Binding State:
00:11:22:33:44:55:66:77
88:99:AA:BB:CC:DD:EE:FF
11:55:35:45:24:78:98:FA
accessTable [index]
This command displays the configured values for the Access Table.
This command has one optional parameter.
Root> show snmp accessTable
The output from the show.snmp.accessTable command appears as
follows:
SNMPv3 State: Enabled
Index Group Name
----- ----------
1 group1
2
3
4 v1Group
5
6
7 v2Group
8
9
10 usmGroup
11 usmGroup
12
If the optional parameter, index is specified, the output from this
command contains the following information:
SNMPv3 State Indicates the status of SNMPv3 (Enabled or
Disabled).
Index Index of the access entry. Valid values are 1 to
6.
Group Name The group name.
Enabled and Restricting E Ports
CLI Commands
show
2
2-223