Config.security.switchbinding.show - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Parameters
Command Example

config.security.switchBinding.show

Syntax
Purpose
Parameters
Command Example
This command has one parameter:
switchBindingState Sets the switch binding state for the switch.
Valid values are:
disable - Disable switch binding. Devices
(servers, storage, and other switches) are
allowed to connect to the switch without
restrictions.
eRestrict - Enable switch binding and restrict
E_Port connections. E_Ports are prevented
from forming ISL connections unless
explicitly identified in the SBML. F_Port
connections are allowed without restriction.
fRestrict - Enable switch binding and restrict
F_Port connections. Server and (or) storage
devices are prevented from forming F_Port
connections with the switch unless explicitly
identified in the SBML. E_Ports are allowed
to form ISL connections without restriction.
allRestrict - Enable switch binding and restrict
E_Port and F_Port connections. Both E_Ports
and F_Ports prohibit connections with all
devices unless explicitly identified in the
SBML.
Root> config security switchBinding setState allRestrict
show
This command displays the switch binding configuration.
This command has no parameters.
Root> config security switchBinding show
config
CLI Commands
2-69
2