Show.snmp.viewtable - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Output
Output Example
SNMPv3 State: Enabled
Index Username
----- --------------------------------
1 User1
2
3
4
5
6

show.snmp.viewTable

Syntax
Purpose
Parameters
Command Example
Output
This command displays the following switch configuration data:
SNMPv3 State Indicates the status of SNMPv3 (Enabled or
Disabled).
Index The index number.
Username The username.
Model The security model.
Group Name The group name.
The output from the show.snmp.V3GroupTable command appears as
follows:
Model
-----
V1
viewTable
This command displays the values for the VACM views that are
presently configured.
This command has no parameters.
Root> show snmp viewTable
This command displays the following switch configuration data:
View Name The name of the view.
Type The type of the view.
Object ID The object ID.
Group Name
----------
Group1
CLI Commands
show
2
2-227