Config.snmp.validateuser - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

config
2
experimental
private
snmpv3
fceos
fcmgmt_3_1
fcmgmt_3_0
fcfe
system
ip

config.snmp.validateUser

E/OS Command Line Interface User Manual
2-94
Syntax
validateUser username secModel secLevel
This command searches the User, Group, and Access tables for the
Purpose
given username, security model, and security level. If the username,
security model, and security level cannot be traced in these tables, a
message will be displayed indicating why.
This command has three parameters:
Parameters
username
secModel
secLevel
This command displays the following switch configuration data:
Output
Username
Auth Protocl
Priv Protocol
Security Model
Security Level
Context Match
Group Name
View Included
View Included
View Included
View Included
View Included
View Included
View Included
View Included
View Included
The username for the user to validate.
The security model of the user.
The security level of the user.
The username.
The authentication protocol used for this user.
The privacy protocol used for this user.
The Security Model for this user.
The Security Level for this user.
The context match method.
The Group that this user belongs to.
.1.3.6.1.3
.1.3.6.1.4
.1.3.6.1.6
.1.3.6.1.4.1.289
.1.3.6.1.2.1.8888
.1.3.6.1.3.94
.1.3.6.1.3.42
.1.3.6.1.2.1.1
.1.3.6.1.2.1.4