Config.fencing.showtypetable; Config.ficoncupzoning.addcontrolhost - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

config.fencing.showTypeTable

Syntax
Purpose
Parameters
Command Example
Output Example

config.ficonCUPZoning.addControlHost

Syntax
Purpose
Parameters
Command Example
Period: 300 seconds
State: Disabled
showTypeTable
This command displays the table of different fencing types that can
be assigned to a policy. This table is used for reference only.
This command has no parameters.
Root> config fencing showTypeTable
The output from the config.fencing.showTypeTable command appears
as follows:
Number Fencing Policy Types
---------------------------------
1 Protocol Error
2 Link Level Hot I/O
3 Security Violationss
addControlHost hostNodeWwn
This command adds a control host to the Control Host List used to
determine the FICON host(s) capable of viewing all ports. This list
overrides the FCZ port visibility mask. The maximum entries in this
list is 8.
This command has one parameter:
hostNodeWwn The node World Wide Name (WWN) of the
desired control host, entered in
colon-delimited notation (e.g.,
01:02:03:04:05:06:07:08).
Root> config ficonCUPZoning addControlHost 01:02:03:04:
05:06:07:08
config
CLI Commands
2-17
2