config
2
Command Example
config.security.fabricBinding.clearMemList
Command Example
config.security.fabricbinding.deactivateFabBind
Command Example
E/OS Command Line Interface User Manual
2-56
Root> config security fabricBinding addMember
AA:99:23:23:08:14:88:C1 2
Syntax
clearMemList
This command clears the Pending FBML in the working area.
Purpose
Members that are attached remain in the list because the Pending
FBML must contain all attached members to become active.
NOTE: This information is not saved to the fabric until the activatePending
command is issued. When the list is cleared, the CLI automatically adds the
managed switch to the Pending FBML.
This command has no parameters.
Parameters
Root> config security fabricBinding clearMemList
Syntax
deactivateFabBind
This command deactivates the active FBML on the fabric. The Active
Purpose
FBML is erased when this command is executed.
NOTE: This command takes effect immediately in the fabric.
This command has no parameters.
Parameters
Root> config security fabricbinding deactivateFabBind