McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 316

A
E/OS Command Line Interface User Manual
A-32
There are no attached nodes.
Description
To add more members, attach more devices to the switch or add the
Action
members by WWN or Domain ID and port.
Message Error 217: All Attached Nodes are in the Zone
All the attached nodes are already in the zone.
Description
To add more members, attach more devices to the switch or add the
Action
members by WWN or Domain ID and port.
Message Error 218: Invalid Port Number
The value entered for the port number is invalid
Description
Enter a port number within the range supported by your director or
Action
switch.
Message Error 219: Invalid Port Type
The port type configured is invalid.
Description
A port may be configured to be an eport, gport, or fport. Be sure the
Action
port is configured appropriately and re-submit the command. On the
Sphereon 4300 and Sphereon 4500 only, fxport and gxport types are
also supported. On the Sphereon 4300, the Fabric Capable feature
must be installed to configure a E_Port, G_Port, or Gx_Port.
Message Error 220: Cannot run diagnostics while a device is logged in to the
port
Diagnostics cannot be run while a device is logged into the port.
Description
Block the port to run diagnostics.
Action
Message Error 221: Cannot run diagnostics on an active E Port