Config.snmp.deleteaccessentry; Config.snmp.deletecommunity; Config.snmp.deleteuserentry - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

config.snmp.deleteAccessEntry

Syntax
Purpose
Parameters
Command Example

config.snmp.deleteCommunity

Syntax
Purpose
Parameters
Command Example

config.snmp.deleteUserEntry

Syntax
Purpose
Parameters
Command Example
deleteAccessEntry index
This command deletes the specified entry from the Access Table.
This command has 1 parameter:
commIndex Index of the access entry. Valid values are 1 to
6.
Root> config snmp deleteAccessEntry 1
deleteCommunity commIndex
This command deletes an SNMP community and trap recipient, if
configured.
This command has one parameter:
commIndex Specifies the community to be deleted. Valid
values are integers in the range 1–6. This value
was set in the commIndex parameter of the
config.snmp.addCommunity command.
Root> config snmp deleteCommunity 5
deleteUserEntry index
This command deletes the specified user entry from the User Table.
This command has one parameter:
index Index of the user entry. Valid values are 1 to 6.
Root> config snmp deleteUserEntry 1
config
CLI Commands
2-85
2