McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 299

The request cannot be completed because a system diagnostic is
Description
running.
Wait for the diagnostic to complete.
Action
Message Error 105: Max Threshold Definitions Reached
The maximum number of total threshold alerts has already been
Description
reached.
Remove a threshold alert before adding the new threshold alert. A
Action
total of 16 counter and throughput threshold alerts is allowed.
Message Error 106: Invalid Threshold Scope
The scope of a threshold alert is not set to a valid state before the user
Description
activates an alert.
Set the scope of the threshold alert, then try to activate the alert.
Action
Message Error 107: Invalid Threshold State
The scope of a threshold alert must be set before the user activates an
Description
alert.
Set the scope of the threshold alert, then try to activate the alert.
Action
Message Error 108: Invalid TTA Type
The type of the throughput threshold alert has not been set.
Description
Set the type of the TTA, then try to activate the alert.
Action
Message Error 109: Invalid CTA Type
The type of the counter threshold alert has not been set.
Description
Set the type of the CTA, then try to activate the alert.
Action
Error Messages
A-15
A