Show.syslog - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

show
2

show.syslog

Command Example
E/OS Command Line Interface User Manual
2-234
Serial Number:
Type Number:
Model Name:
Model Number:
EC Level:
Firmware Version: 04.01.00 Build 23
Beaconing:
syslog
Syntax
This command displays the syslog configuration
Purpose
This command has no parameters.
Parameters
The syslog configuration is shown as a table of properties. The
Output
following properties are displayed:
Log
State
Index
IP Address
Facility
Root> Config Syslog show
Syslog State:
Index
-----
1
2
3
Log
--------------------------
Event Log
Open Trunking Re-Route Log
Link Incident Log
Security Log
Audit Log
Fabric Log
Embedded Port Frame Log
82420481
006064
ED-6064
001
1011231
Disabled
The index number of the server.
Reports if syslog support is enabled.
The index number of the server.
The IP address of the server.
The facility level for the server. Values are Local 0 -
Local 7.
Disabled
IP Address Facility
--------------- --------
172.16.22.23 Local 0
180.77.66.55 Local 5
State
--------
Enabled
Disabled
Disabled
Enabled
Enabled
Enabled
Disabled